Raze Engine Coolant Heated Snowbike Handle Bars

$495.00

Available

 

Patented Engine Coolant Heated Snowbike Handlebars KTM/HUSKY 350&450

Our Patented Liquid Heated Handlebars keep your hands warm while maintaining a consistent engine temp.
  • Zero electricity required
  • Easy install
  • Compatible with all hand guards
  • Includes adjustable temp control valve
  • Includes thermostat for snow bikes
  • Made in USA
Please read the full product description, resource files all product FAQ’s before purchase. If you have questions send us a message.
Kit Includes: Billet inline thermostat, ProTaper Henry/Reed bars, PTFE black lines, AN fittings, and temp control valve.
Engine coolant is routed through the bars which takes no electricity and sets a perfect temperature. The high-pressure side to the bars is routed on the back side of the thermostat so you have warm hands in less than 30 seconds upon starting of the engine. When you shut the warm bike off it creates a thermal syphon. Due to the bars being the highest point on the cooling system the bars stay warm for up to 15 minutes after you shut it off.
Many stock dirt bikes do not have a thermostat which is why one is supplied in this kit. When a dirt bike is running in freezing cold temps and at high altitudes it can cause huge swings in the engine coolant temperature. The inline thermostat supplied with this kit will maintain a steady 180-degree operating temperature. This will help solve the huge AFR and engine efficiency problems snow bikes have.
Our thermostat has a mechanical auto-adjusting valve that restricts the flow of the coolant system. When the engine coolant is cold, the valve is closed. Once the engine gets up to operating temperature, the valve opens a little, and starts to allow coolant to flow to the radiator. When the engine is hot the valve opens more, allowing the coolant to flow through the radiator to dissipate excess heat. As the engine heats up or cools off due to environment or work load, the valve self-adjusts to maintain a targeted 180°F, the proper engine temperature.
Specify in the checkout description if you run bar risers. If you do specify what height bar riser you run so we can supply longer lines with the kit.

 


*Actual product colors may vary from images shown. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.

Orders will be processed and shipped via USPS as soon as possible.

Please CONTACT US at (303) 279-7195 if you have any questions about product orders or shipping.

Actual product colors may vary from image shown*

 

Patented Engine Coolant Heated Snowbike Handlebars KTM/HUSKY 350&450

Our Patented Liquid Heated Handlebars keep your hands warm while maintaining a consistent engine temp.
  • Zero electricity required
  • Easy install
  • Compatible with all hand guards
  • Includes adjustable temp control valve
  • Includes thermostat for snow bikes
  • Made in USA
Please read the full product description, resource files all product FAQ’s before purchase. If you have questions send us a message.
Kit Includes: Billet inline thermostat, ProTaper Henry/Reed bars, PTFE black lines, AN fittings, and temp control valve.
Engine coolant is routed through the bars which takes no electricity and sets a perfect temperature. The high-pressure side to the bars is routed on the back side of the thermostat so you have warm hands in less than 30 seconds upon starting of the engine. When you shut the warm bike off it creates a thermal syphon. Due to the bars being the highest point on the cooling system the bars stay warm for up to 15 minutes after you shut it off.
Many stock dirt bikes do not have a thermostat which is why one is supplied in this kit. When a dirt bike is running in freezing cold temps and at high altitudes it can cause huge swings in the engine coolant temperature. The inline thermostat supplied with this kit will maintain a steady 180-degree operating temperature. This will help solve the huge AFR and engine efficiency problems snow bikes have.
Our thermostat has a mechanical auto-adjusting valve that restricts the flow of the coolant system. When the engine coolant is cold, the valve is closed. Once the engine gets up to operating temperature, the valve opens a little, and starts to allow coolant to flow to the radiator. When the engine is hot the valve opens more, allowing the coolant to flow through the radiator to dissipate excess heat. As the engine heats up or cools off due to environment or work load, the valve self-adjusts to maintain a targeted 180°F, the proper engine temperature.
Specify in the checkout description if you run bar risers. If you do specify what height bar riser you run so we can supply longer lines with the kit.

 


*Actual product colors may vary from images shown. Every monitor or mobile display has a different capability to display colors, and every individual may see these colors differently. In addition, lighting conditions at the time the photo was taken can also affect an image's color.

Orders will be processed and shipped via USPS as soon as possible.

Please CONTACT US at (303) 279-7195 if you have any questions about product orders or shipping.